Amino Trimethylene Phosphonic Acid Uses in Water Treatment

Reasons for Adding Acid When Using Amino Trimethylene Phosphonic Acid

Among many kinds of water treatment agents, amino trimethylene phosphonic acid has the function of dispersing insoluble inorganic salts in water, preventing or interfering the precipitation and scaling of insoluble inorganic salts on metal surface. Amino trimethylene phosphonic acid can be used to reduce the hardness of boiler water and soften the water quality. So as to prevent the scaling and corrosion of large and medium-sized boilers. It has a good preventive effect for normal scaling. So it is widely used. So, what are the reasons for adding acid when using amino trimethylene phosphonic acid?

1. In order to prevent the formation of water insoluble compounds, acid is added to the feed water of amino trimethylene phosphonic acid.

Amino Trimethylene Phosphonic Acid Uses in Water Treatment
2. Amino trimethylene phosphonic acid makes a small amount of corrosion and scale inhibitor adsorbed on the surface of micro crystal through the “threshold effect”, so as to prevent the growth and deposition of micro crystal. The purpose of adding acid is to adjust the equilibrium concentration of carbonate compounds by adjusting the pH value of water. And then adjust the equilibrium concentration of calcium carbonate to prevent the formation of calcium carbonate.

3. The common acids are hydrochloric acid and sulfuric acid. But amino trimethylene phosphonic acid is not necessarily useful for all scaling ions. The specific corrosion and scale inhibitors should be selected according to the specific water quality. According to the scaling tendency of water quality, the suitable products can be selected for users and the dosing scheme can be formulated.

To sum up, the main purpose of a in water treatment is to maintain the equilibrium concentration of acid compounds by adjusting pH value. Its also to help dissolve compounds. So as to play a better role in descaling. So it also shows the importance of acid adding details. In addition, hydrochloric acid and sulfuric acid are commonly used in this treatment process. I hope you can understand it.

Working Principle of Water Treatment Chemicals

Speaking of water treatment chemical, we all know that it is a kind of water treatment chemical. In fact, there are many types of water treatment chemicals. When these chemicals are used in sewage, the purpose of scale removal, separation, sterilization, flocculation and purification can be realized. Especially the purification function of water treatment agent. It has great influence on the effect of sewage treatment. So what is the working principle of purification function of water treatment chemical?

1. Water treatment chemical first adsorbs impurities in water. In this way, the chemical composition of the water treatment agent can degrade the impurities. Or settle the adsorbate. In this way, the pollutants can be separated from the water source, and then further purified.

2. Water treatment chemicals can quickly deal with pollutants. Quick effect is a characteristic of water treatment chemicals. It can not only treat and purify all kinds of pollutants. And the speed of purification is very fast. It takes about an hour for a general agent to be treated. However, due to the current reagent purification speed has been greatly improved. About half an hour to achieve the purpose and requirements of purification.

Water treatment agents play a purification role in wastewater mainly through adsorption of impurities and treatment of pollutants. It can clean up a lot of domestic water, industrial wastewater and garbage storage wastewater. Through the regulation and rectification of water resources to achieve clean.

2020-08-31T06:24:29+00:00 August 6th, 2020|Tags: |